Genie 1128 User Manual

INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
BELT/CHAIN DRIVE GARAGE DOOR OPENERS
PROGRAMMING, OPERATION & MAINTENANCE MANUAL
39786503812, 03/2018
SERIAL NUMBER DECAL
STOP
DO NOT return product to store,
visit www.GenieCompany.com
or call Customer Service at: 1-800-35-GENIE
iDCM SERIAL NUMBER DECAL
To reduce the risk of injury to persons or damage to property, use this opener only with a sectional residential
door.
WARNING
Por reduire le risque de blessures ou de dommages materials, utillsez cet ouvre-porte uniquement pour une porte
a section re sidentielie.
AVERTISSEMENT
!
!
Refer to the assembly poster
for opener assembly and
installation instructions. Return
to this manual for programming,
operation and maintenance.
• SingleBulbModels
• DualBulbModels
• BBUModels
• iDCMModels
• IntegratedLEDlightedModels
DO NOT use photocells from other manufacturers or openers with this opener.

Genie 1128 Specifications

General

Brand	Genie
Model	1128
Category	Garage Door Opener
Language	English

Summary

Safety & Standard Features

Safe-T-Beam® (STB) Non-Contact Reversing System

Infrared beam system across door opening for safety.

Contact Reversing System

Integrated Aladdin Connect® (iDCM)

Opener Programming & Accessory Installations

Programming Down Travel Limit

Setting the door's lowest travel position.

Programming Up Travel Limit

Setting the door's highest travel position.

Force and Contact Reverse Programming

Setting door force and testing safety reverse function.

Programming Additional Remote Controls

Instructions for adding or reprogramming remote controls.

Accessory Programming: Keypad, HomeLink, Car2U

Guides for programming keypads and vehicle remotes.

Aladdin Connect® Setup

Steps to set up the Aladdin Connect mobile app.

Maintenance

General Maintenance Safety Instructions

Regular Inspection Schedule

Troubleshooting

DASMA Safety Guidelines