Genie Aladdin Connect Quick Setup Guide

STEP 1
In the Home close to Wi-Fi Router:
1. Remove mounting bracket from back of DCM. FIG.A,
2. Plug Aladdin Connect™ into wall outlet with Power Pack.
FIG. B.
3. Plug power pack into DCM controller.
STEP 2
In the Home close to Wi-Fi Router:
Download the Aladdin Connect™ app.
1. Scan the QR code below or visit www.GenieCompany.
com/AladdinConnect to start the setup of the Aladdin
Connect™ device.
2. Follow the on-screen menus to create an account and
program system prior to wiring in the garage.
3. At the installation prompt, disconnect
power pack and move system to the
garage.
NOTE: Customers using control apps from other vendors and NOT
using the Aladdin Connect™ app to control this system will need to
visit www.GenieCompany.com/AladdinConnect for specic Wi-Fi
instructions.
FIG.A FIG.B
DCM
Installation Prompt
Scan for app.
Apple and the Apple logo are trademarks
of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark
of Apple Inc.

Genie Aladdin Connect Specifications

General

Connectivity Protocol	Wi-Fi
Frequency Band	2.4 GHz
Wireless Standard	IEEE 802.11 b/g/n
Mobile App Support	Yes
Operating Temperature	-4°F to 122°F (-20°C to 50°C)