Home Screen
11
Electricity (left)
The dial on the left (only available
when you have an electricity smart
meter) shows the current rate of
energy use for your home.
As your home uses more or less
energy, the dial will move up and
down.
The dial is divided into three zones
- green, amber and red. As the dial
moves between the zones, the colour
of the button on the top of the display
will change to match.
This means you can quickly see if
your home is using a little or a lot of
electricity from a distance or at times
when the screen has dimmed or
turned o overnight.
The current rate of consumption can
be shown in cost as £/hr (default) or
energy as kW.
Touch the dial to go to Electricity
history.
Gas / House Temperature (right)
The gas ame indicates the recent
consumption rate of gas for the home
(where available). The usage readings
are taken every half an hour.
As more gas is consumed, the blue
ame will increase in size.
Due to readings being taken every half
an hour, the ame shows recent gas
consumption and may not show when
gas is no longer being consumed.
The house image on the right shows
the current internal temperature
of your home, as measured by the
Trio II monitor, and indicates how
the temperature compares with the
desired “set point” (which can be
changed within Settings) - green for
more than 1ºC below the set point,
white for set point and red when more
than 1ºC over.
Touch the ame to go to Gas history,
where available.
To Next Page
Loading...
Need help?
General
