8
Trio II | User Manual
Getting Started
Meter Connection
The screen will show Connecting to
smart meter... for up to 5 minutes
while the monitor connects to the
smart meter(s) in your home.
Should the screen show No Network
then you will need to contact your
energy provider to complete the
installation.
If the screen shows Lost Network,
then you may need to move the
monitor closer to your smart meter(s)
to re-establish the connection.
You can check the strength of the
signal to the smart meter(s) by
pressing the top button on the
monitor.
Connection Established
Once your monitor has successfully
established a connection to your
smart meter(s), your Trio II will
show the current consumption for
electricity, recent gas usage and the
house temperature.
If your monitor loses connection to the
smart meter(s), then it will show the
following alert:
Try moving the Trio II closer to the
smart meter(s) to re-connect.
To Next Page
Loading...
Need help?
General
