PRECAUTIONS
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national regulations in force in your country.
ELECTROMAGNETIC COMPATIBILITY (EMC)
Description
The term Electromagnetic Compatibility is taken to mean the capability of the product to function smoothly in an environment where
electromagnetic radiation and electrostatic discharges are present, and without causing electromagnetic disturbances to other equipment.
WARNING
Electromagnetic radiation can cause disturbances in other equipment. Although the product meets the strict regulations and standards which are
in force in this respect, the manufacturer cannot completely exclude the possibility that other equipment may be disturbed.
CAUTION
There is a risk that disturbances may be caused in other equipment if the product is used in conjunction with accessories from other
manufacturers, for example field computers, personal computers, two-way radios, nonstandard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended by the manufacturer. When combined with the product,
they meet the strict requirements stipulated by the guidelines and standards. When using computers and two-way
radios, pay attention to the information about electromagnetic compatibility provided by the manufacturer.
CAUTION
Disturbances caused by electromagnetic radiation can result in erroneous measurements. Although the product meets the strict regulations and
standards within this respect, the manufacturer cannot completely exclude the possibility product may be disturbed by very intense
electromagnetic radiation, near radio transmitters, two-way radios or diesel generators.
Precautions:
Check the plausibility of results obtained under these conditions.
WARNING
If the product is operated with connecting cables attached at one of their two ends, for example, external supply cables, interface cables, the
permitted level of electromagnetic radiation may be exceeded and the correct functioning of other products may be impaired.
Precautions:
While the product is in use, connecting cables, for example product to external battery, product to computer, must be connected at both ends.
Safety Information: Radio
FCC Labels on sensors & LED Display
To Next Page
Loading...
