GeoMax Zone60 DG User Manual (English)

Questions and Answers:

C
Carrie TaylorJul 31, 2025
What to do if the laser receiver is not working properly with GeoMax Measuring Instruments?
- E
  Ebony ClineJul 31, 2025
  If the laser receiver of your GeoMax Measuring Instruments isn't working properly, here are a few things to check: * Ensure the Zone60 DG is rotating correctly and not in leveling or H.I.Alert mode. * Make sure the receiver is within the usable range of the Zone60 DG; move closer if needed. * Check the receiver's battery level and replace the batteries if the low battery symbol is displayed.
S
Shawn DeanAug 4, 2025
How to fix a GeoMax Measuring Instruments Zone60 DG that does not turn on?
- R
  Robert WilsonAug 4, 2025
  If your GeoMax Zone60 DG Measuring Instruments does not turn on, the batteries may be low or dead. Check the batteries and replace or charge them if necessary. If it still does not turn on, return the Zone60 DG to an authorised service centre for service.
D
Daniel TerryAug 9, 2025
Why is the laser distance reduced on my GeoMax Zone60 DG?
- C
  Carol BeckAug 9, 2025
  If the laser distance of your GeoMax Measuring Instruments is reduced, dirt may be reducing the laser output. Clean the windows of the Zone60 DG and the receiver. If the problem continues, return the Zone60 DG to an authorised service centre for service.
J
jasonjosephAug 13, 2025
What to do if my GeoMax Zone60 DG laser stops too often to relevel?
- Y
  yhamiltonAug 13, 2025
  If the laser of your GeoMax Measuring Instruments stops too often to relevel, the sensitivity setting may be set to “fine”. Choose Sensitivity Setting 2 in the option menu. Also, check your tripod for stability, tighten all screws, and use sand bags on the legs if necessary. Shelter the Zone60 DG from the wind and press the tripod legs more firmly into the ground.
M
Marcia MillerAug 17, 2025
Why is my GeoMax Measuring Instruments ZRC60 remote control not working?
- J
  Jason StevensonAug 17, 2025
  If the ZRC60 remote control for your GeoMax Measuring Instruments is not working properly, it might be out of usable range. For normal operation, the remote control works up to 300 m (1,000’). Also, check the Remote Battery LED on the control panel and change the remote control batteries if they are low.
A
Angel FoleyAug 21, 2025
How to adjust the display brightness on GeoMax Measuring Instruments?
- T
  Todd HaleAug 21, 2025
  If the display of your GeoMax Measuring Instruments is too dark or too light, the display brightness setting may be unsuitable. Reset the brightness for both the Zone60 DG and the remote control in the menu of the respective device.
D
Dr. John Carlson DDSAug 26, 2025
Why does the grade reset to zero on my GeoMax Measuring Instruments?
- A
  Aaron TurnerAug 27, 2025
  If the grade resets to zero each time the laser of your GeoMax Measuring Instruments is turned on, the wrong setting may have been selected. Choose the desired setting in the option menu.

GeoMax Zone60 DG Specifications

General

Type	Rotating Laser
Accuracy	±1.5 mm at 30 m
Self-Leveling Range	±6°
Rotation Speed	600 rpm
Laser Class	Class 2
Operating Temperature	-20°C to +50°C
Ingress Protection	IP67
Weight	2.5 kg (5.5 lbs)
Grade Accuracy	±0.1%
Measurement Time	Instant
Laser Wavelength	635 nm
IP Rating	IP67
Power Supply	rechargeable battery

Summary

Introduction to GeoMax Zone60 DG

Product Identification and Documentation

Locates product details and lists available documentation for guidance.

Safety Directions

General Safety and Usage

Covers essential safety guidelines, intended use, and user responsibilities for hazard avoidance.

Hazards and Misuse Warnings

Details risks from product misuse, environmental hazards, and battery handling.

Electrical and Environmental Safety

Warns about electrocution, lightning, site security, and accessory safety.

Laser Classification and Safety

Explains laser safety standards and the Zone60 DG's Class 1 laser classification.

Electromagnetic Compatibility and Compliance

Electromagnetic Compatibility (EMC)

Defines EMC and discusses potential electromagnetic disturbances with equipment.

FCC Statement and Labelling

Details FCC compliance, labelling requirements, and product certifications.

Receiver Labelling

ZRB35, ZRP105, ZRD105, ZRD105B Labels

Shows identification labels for various compatible receivers.

System Description and Setup

System Components Overview

Introduces the Zone60 DG, its applications, and available system components.

Laser and Case Components

Identifies and illustrates the laser components and internal case parts of the Zone60 DG.

Setup Procedures

Provides detailed instructions for selecting a location and setting up the Zone60 DG on a tripod.

Operation

User Interface and Controls

Explains the Zone60 DG's user interface, buttons, and power functions.

Grade Entry and Adjustment

Guides on entering grade values, resetting them, and understanding grade capabilities.

Axis Alignment Procedures

Details axis identification, slope conversion, and alignment steps for accurate work.

Laydown Operation

Describes using the Zone60 DG in a laydown position for vertical plane layout jobs.

Remote Control Operation

ZRC60 Remote Control Overview

Introduces the remote control, its panel components, and battery replacement.

Pairing the Remote Control

Provides step-by-step instructions for pairing the Zone60 DG with the ZRC60 remote.

Remote Connection Screens

Explains the wait, connecting, and lost communication screens for the remote.

Receivers

Receiver Overview and Components

Introduces receivers and details components of the ZRB35 basic receiver.

ZRP105 and ZRD105 Receivers

Details components and buttons for ZRP105 and ZRD105 receivers.

ZRD105B Digital RF Receiver

Describes the ZRD105B receiver's components and button functions.

Using and Pairing the ZRD105B

Explains special functions and pairing procedures for the ZRD105B receiver.

Zone60 DG Menu Settings

Access and Navigation

Guides on accessing and navigating the Zone60 DG's various menu options.

Menu Set 1: Head Speed and Alerts

Covers head speed settings, H.I.Alert function, and its settings.

Menu Set 1: Modes and Sensitivity

Explains automatic/manual modes and sensitivity settings for the Zone60 DG.

Menu Set 2: Display and Masking

Details display brightness, beam masking options, and related settings.

Menu Set 2: Temperature and Radio Settings

Covers temperature sensitivity, negative grade, and radio enable/disable options.

Menu Set 3: Customer and Calibration Settings

Details customer name entry, display options, password protection, and calibration alerts.

ZRC60 Remote Control Menu

Overview and Display Settings

Explains the remote control menu, overview, and display brightness adjustments.

Sleep Mode and Shut-off Time

Details sleep mode duration and automatic shut-off time for the remote control.

Applications

Setting Forms and Checking Grades

Guides on setting forms and checking grades using the Zone60 DG and receivers.

Entering Grades

Provides step-by-step instructions for entering grade values into the Zone60 DG.

Beam Catching and Beam Lock

Explains grade matching features like Beam Catching and Beam Lock with ZRD105B.

Batteries

Battery Operating Principles

Covers battery charging, operation, and general principles for safe use.

Zone60 DG Battery Management

Details charging and changing Li-Ion and alkaline batteries for the Zone60 DG.

Accuracy Adjustment

Checking Level Accuracy

Provides procedures to check and verify the laser's level accuracy.

Self-Levelling Accuracy Calibration

Guides on entering calibration mode and calibrating X and Y axes for self-levelling.

Vertical Accuracy Calibration

Details procedures for entering calibration mode and calibrating the Z-axis for vertical accuracy.

Troubleshooting

Alerts and Message Screens

Lists common alerts, their symptoms, and potential causes or solutions.

Common Problems and Solutions

Addresses various operational issues like communication loss, power problems, and grade entry errors.

Care and Transport

Transport Guidelines

Provides instructions for safe transport of the equipment in various conditions.

Storage and Cleaning

Details storage temperature limits, cleaning methods for lenses, and drying procedures.

Technical Data

Regulatory Compliance

Lists national and international regulations and directives the product complies with.

Dangerous Goods and Product Specifications

Details hazards of Lithium batteries, product operating range, and self-levelling accuracy.

Device and Battery Specifications

Lists self-levelling range, head speed, dimensions, grade capability, and environmental specs.

Charger, Remote Control, and Battery Data

Provides technical data for the Li-Ion charger, battery pack, and remote control.

Related product manuals

GeoMax Zoom 20 series

262 pages

GeoMax Zoom 30 series