GeoMax Zone60 DG User Manual

3 Operation
3.1 User Interface
a
b
c
e
d
f
011215_001
a LCD display
b Up and down arrow buttons
c Left and right arrow but-
tons
d Status LED
e Power button
f Grade button
Component Function
LCD display Displays all required user information.
Grade button Press to start grade entry mode.
Left and right arrow but-
tons
Press to display and move the cursor for grade entry.
Press both simultaneously to enter the Zone60 DG menu.
Up and down arrow but-
tons
Press to change the grade displayed.
Press both simultaneously to reset the grade value to zero.
Power button Press to turn on or off the Zone60 DG.
Status LED Indicates the level status of the Zone60 DG.
3.2 Turning the Zone60 DG on and off
Press the Power button to turn the Zone60 DG on or off.
After turning on:
•
The LCD display turns on and displays the current status of the Zone60 DG.
•
If set up within the +/-6° self-levelling range (horizontal or vertical), the Zone60 DG auto-
matically levels to create an accurate horizontal plane of laser light.
•
Once levelled, the head starts rotating and the Zone60 DG is ready for use.
•
The H.I.Alert system becomes active 30 seconds after completing the self-levelling. The
H.I.Alert system protects the Zone60 DG against changes in elevation caused by any move-
ment or settling of the tripod.
•
The self-levelling system and the H.I.Alert function continue to monitor the position of the
laser beam to ensure consistent and accurate work.
☞
The H.I.Alert function turns on automatically every time the Zone60 DG is turned on.
3.3 The LCD Display
The LCD display shows all the information that is required to operate the Zone60 DG.
007586_001
cdef g
a
b
a X-axis grade value
b Y-axis grade value
c Beam masking
d Radio indication
e Battery level indication
f H.I. indication
g Head speed
Overview
Description
Turn on and off
Main display
Operation 19

GeoMax Zone60 DG Specifications

General

Brand	GeoMax
Model	Zone60 DG
Category	Measuring Instruments
Language	English