4.2 Pairing the Zone60 DG with the ZRC60 Remote Control
The Zone60 DG and the ZRC60 remote control include radio devices that allow you to activate
the functions on the Zone60 DG remotely up to 300 m (1000’) from the Zone60 DG.
Before using the RF features, the Zone60 DG and the remote control must be paired together to
be able to communicate with each other.
1. Turn off both the Zone60 DG and the remote control.
2. Press and hold the Power button on the Zone60 DG for 5 seconds to turn on the
Zone60 DG in pairing mode. The Zone60 DG beeps five times slowly.
3. Press and hold the Power button on the remote control until pairing is confirmed.
4. When the pairing is successful:
Both the Zone60 DG and the remote control beep quickly five times and the Status
LED flashes green quickly (5 Hz). There is no confirmation on the LCD displays dur-
ing this process.
5. When the pairing is not successful:
Both the Zone60 DG and the remote control beep slowly three times and the Status
LED flashes red (1 Hz).
Pairing step-by-step
26 ZRC60 Remote Control
To Next Page
Loading...
Need help?
General
