Need help?Do you have a question about the GeoVision GV-AS4110 and is the answer not in the manual?
General| Interface | RS-485 |
|---|---|
| Case design | Bare |
| Built-in UPS | - |
| Maximum number of doors | 4 door(s) |
| Supported network protocols | TCP/IP |
| Power consumption | 200 mA |
| Switchable current | 0.9 A |
| Switchable DC voltage | 12 V |
| Power consumption (typical) | 10.8 W |
| Operating temperature (T-T) | 0 - 65 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Number of Wiegand readers supported | 8 |
Weight and Dimensions| Depth | 110 mm |
|---|---|
| Width | 420 mm |
| Height | 300 mm |
| Weight | 4400 g |
Lists the technical specifications for the GV-AS100 and GV-AS1010 controllers.
Lists the technical specifications for the GV-AS110 and GV-AS1110 controllers.
Lists the technical specifications for the GV-AS120 controller.
Lists the technical specifications for the GV-AS210, AS2110, and AS2120 controllers.
Lists the technical specifications for the GV-AS410, 4110, 810, and 8110 controllers.
Lists the technical specifications for the GV-EV48 controller.
Details how to configure a static IP address for network connectivity.
Explains network setup using dynamic IP addresses via DHCP servers.
Configures door, Wiegand, alarms, time, input/output functions, and reader settings.
Solves issues related to network connectivity problems between GV-ASManager and controllers.
Addresses troubleshooting steps for interrupted connections, likely due to IP conflicts.
To Next Page
