EasyManua.ls Logo

GeoVision GV-AS2120 User Manual

GeoVision GV-AS2120
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GV-AS/EV Controller
Before attempting to connect or operate this product, please
read these instructions carefully and save this manual for future use.
User’s Manual
ASEV-J

Table of Contents

Other manuals for GeoVision GV-AS2120

Question and Answer IconNeed help?

Do you have a question about the GeoVision GV-AS2120 and is the answer not in the manual?

GeoVision GV-AS2120 Specifications

General IconGeneral
TypeIntelligent access control reader
CertificationCE, FCC
Number of users100000 user(s)
Access code reader-
Fingerprint readerYes
Authentication typeAccess chip/card
Sustainability certificatesRoHS
Operating temperature (T-T)0 - 65 °C
Operating relative humidity (H-H)10 - 90 %
DC current (max)3 A
DC voltage range12 - 30 V
Power consumption200 mA
RS-485 ports1
Weight and Dimensions IconWeight and Dimensions
Depth46.6 mm
Width210 mm
Height204 mm
Weight810 g

Summary

GV-AS/EV Controller User's Manual

Important Notes for Maintaining Power Supply

Battery Types and Replacement

Details the types of batteries used and replacement procedures for GV-AS/EV controllers.

Elevator Control

Installation Considerations

1. GV-AS100 / 1010 Controller

1.2 Installation and Connections

Covers physical installation, wiring, and connecting peripherals like readers, inputs, outputs, and PCs.

1.3 Programming Mode

Details the initial setup, card management, and configuration procedures like adding/deleting cards and setting parameters.

1.4 Web-Based Configurations

Information on accessing and configuring the controllers via web interface.

2. GV-AS110 / 1110 Controller

2.2 Installation and Connections

Covers physical installation, wiring, and connecting peripherals like readers and PCs.

2.3 Programming Mode

Details the initial setup, card management, and configuration procedures.

2.5 Web-Based Configurations

Information on accessing and configuring the controllers via web interface.

3. GV-AS120 Controller

3.2 Installation and Connections

Covers physical installation, wiring, and connecting peripherals like readers and PCs.

3.3 Programming Mode

Details the initial setup, card management, and configuration procedures.

3.5 Web-Based Configurations

Information on accessing and configuring the controllers via web interface.

4. GV-AS210 / 2110 / 2120 Controller

4.2 Installation and Connections

Covers physical installation, wiring, and connecting peripherals like readers and PCs.

4.4 The Web Interface

Information on accessing and configuring the controllers via web interface.

5. GV-AS410 / 4110 / 810 / 8110 Controller

6. GV-EV48 Controller

7. Installing on a Network

7.1 Fixed IP Connection

Guides on configuring a static IP address for network connectivity.

7.2 DHCP Connection

Explains how to use dynamic IP addresses with DDNS for network access.

8. The Web Interface

10. Troubleshooting

Q1: GV-ASManager Internet Connection Issues

Troubleshooting guide for internet connection issues between GV-ASManager and controllers.

Q2: Connection Interruption Between GV-ASManager and Controller

Steps to resolve interrupted connections due to IP address conflicts or network issues.

Related product manuals