Administrator Mode
79
4
[Date & Time on GV-IPCAM] Displays the current date and time on GV-CS1320
[Time Zone] Sets the time zone for local settings. Select Enable Daylight Saving Tim to
automatically adjust GV-CS1320 for daylight saving time. Select the Start and Stop time to
enable the daylight saving function.
[Synchronized with a Network Time Server] By default, GV-CS1320 uses the timeserver
of time.windows.com to automatically update its internal clock every 24 hours at the Update
Time you specified. You can also change the host name or IP setting to the timeserver of
interest.
[Synchronized with your computer or modify manually] Manually changes GV-CS1320’s
date and time or synchronize the camera access controller’s date and time with those of the
local computer.
[Date and time overlay setting] Select the display format of date and time stamps on the
image. For this function to work, you must also enable the Overlaid with date stamps and
Overlaid with time stamps options in Figure 4-2b.