GeoVision GV-CS1320 User Manual

Administrator Mode
55
4
4.2.1.1 Function Setting
With the function setting, you can assign certain authentication methods for controlling a
door/gate or an elevator.
Figure 4-6
[ID] Enter the ID number for the controller. This ID is used by GV-ASManager to differentiate
among multiple units of controllers. The ID number can only be between 1 and 1000.
[Door/Gate #] [Elevator] Select the function type and the authentication mode for the use of
the Doors / Gates / Elevators.
 Function: Select the function for GV-CS1320 to be installed in a general door / parking
place and an elevator for entry or exit access control.
 Door Entry Control
 Parking Entry Control
 Door Exit Control:
 Parking Exit Control
 Elevator Control
 Authentication Mode: Select the authentication mode for the Doors/Gates or Elevator.
 Local Unlock Mode: Remains open. The held-open state cannot be cleared through
GV-ASManager.

GeoVision GV-CS1320 Specifications

General

Type	IP security camera
Certification	CE, FCC, RCM, RoHS
Day/night mode	Yes
Languages support	CHI (TR), ENG, ESP, FRE, POR, RUS
Number of languages	6
Operating frequency	13.56 MHz
Placement supported	Outdoor
Connectivity technology	Wired
Sensor type	CMOS
Number of sensors	1
Optical sensor size	1/2.8 \
Number of effective pixels (H x V)	1920 x 1080 pixels
White balance	Auto, Manual
Camera pan control	No
Camera shutter type	Electronic
Camera shutter speed	1/5 s
Minimum illumination	0.02 lx
Adjustment shutter speed	Auto/Manual
Field of view (FOV) angle	180 °
Audio formats supported	AAC, G.711
Signal-to-Noise Ratio (SNR)	52 dB
LED type	IR
Night vision distance	3 m
Number of illumination LEDs	2
Fixed focal length	1.7 mm
Focal length range	1 - 1 mm
Maximum aperture number	2.5
Total megapixels	2 MP
Video formats supported	H.264, M-JPEG
Wi-Fi	-
Ethernet interface type	Fast Ethernet
Supported network protocols	HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP, DynDNS, 3GPP/ISMARTSP, PSIA, SNMP, QoS(DSCP), ONVIF(ProfileS)and(ProfileC)
Compatible memory cards	MicroSD (TransFlash)
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
DC output current	2.5 A
DC output voltage	12
Power source type	DC, PoE
Power consumption (max)	25.5 W
Sustainability certificates	RoHS
Mounting type	Wall
Product color	Black
International Protection (IP) code	IP66
Memory card included	MicroSD
Included memory card size	2 GB

Weight and Dimensions

Depth	34.5 mm
Width	80 mm
Height	137 mm
Weight	315 g