GeoVision GV-FD220D Quick Start Guide

9.3 Installation
Follow the steps below to install the Bullet Camera.
1. Paste the supplied sticker to the ceiling/wall. For wall installations,
make sure the arrow on the sticker points toward the ceiling.
2. Drill the shaded area, and insert the screw anchor into the three holes.
3. Loosen the indicated screws with the supplied torx wrench to remove
the base.
82

GeoVision GV-FD220D Specifications

General

Brand	GeoVision
Model	GV-FD220D
Category	Security Camera
Language	English