Target Bullet Camera
11 12
6. Install the camera to the wall or ceiling using the screw anchors and
screws for supporting rack.
Figure 5-12
IMPORTANT: To avoid waterproofing failures, the top of the camera
must be facing upward for wall mount.
Figure 5-13
7. Connect the wires and cable connector to the camera. See 11.4
Connecting the Camera.
8. Access the live view. For details, see 3.1. Accessing the Live View,
GV-IPCam H.264 Firmware Manual.
10. Adjust angles of the camera body based on the live view.
119
To Next Page
Loading...
Need help?
General
