GeoVision GV-MFD320 Hardware Manual

78
6.4 Installation
Follow the steps below to install, connect to and adjust your Advanced
Cube Camera and Wireless Advanced Cube Camera.
1. Put the supporting rack on the desired location and make marks for
screw anchors.
Figure 6-2
2. Drill the marks and insert the screw anchors.
3. Secure the supporting rack onto the wall using the supplied screws.
4. Screw the camera onto the supporting rack and fasten the indicated
screw.
Figure 6-3

GeoVision GV-MFD320 Specifications

General

Brand	GeoVision
Model	GV-MFD320
Category	Security Camera
Language	English