GeoVision GV Series Hardware Installation Guide

Align the 3 support brackets with the notches on the side of the
camera and secure on the back with the in-ceiling mount screws
provided.
2
Place the fisheye camera into the ceiling opening.
3
Place the installation sticker on the ceiling board, and cut the circle
part out of the ceiling. Drill the 3 holes indicated as “Device”.
1
In-Ceiling Mount allows the GV-Fisheye IP Camera to be mounted into the
ceiling, revealing a small portion of the camera. In-Ceiling Mount requires
the ceiling board to be between 0.5 – 3.0 cm (0.2 – 1.18 in).
In-Ceiling Mount
Note: In-ceiling mount is not applicable to the models with IR LED
ring (GV-FER3403 / 5303).
Device
TOP
Device
Device
PoE Converter
PoE Converter
PoE Converter
PoE Converter
IR

GeoVision GV Series Specifications

General

Series	GV Series
Category	Security Camera
IP Rating	IP66, IP67
Power Supply	PoE, 12V DC
Video Compression	H.264, H.265
Day/Night Mode	Yes
Network Interface	RJ45
Resolution	Varies by model (e.g., 1080p, 4K)
Lens	Varies by model (e.g., fixed, varifocal)
IR Distance	Varies by model (e.g., 30m, 50m)