GEPRC Cinebot30 - Specifications

4 / 21
Specifications：
Model: Cinebot30 HD Quadcopter
Brand: GEPRC
Frame: GEP-CT30
Wheelbase:127mm
Top plate thickness: 2mm
Main plate thickness : 3mm
Base plate thickness: 1.5mm
FC : GEP-F722-45A AIO V2
MCU: STM32F722
IMU: ICM-42688-P
VTX:Vista Nebula Pro/Runcam Link/Walksnail Avatar/GEPRC RAD 1W /DJI O3 air unit
Propeller: Hq prop T76mm
Antenna: 5.8G
Battery Interface: XT60H-M
Motor: SPEEDX2 1804-2450KV（6S Version）/ SPEEDX2 1804-3450KV（4SVersion）
Weight: 222g (vista HD pnp)/Nebula Pro version 222.5g/Avatar version 221g/ Analog
version 209.2g/ Link Wasp version 222.5g (excluding the battery, the above are TBS
RXnano version)
Receiver: PNP，Frsky R-XSR ，TBS Nano 915M RX，ELRS 2.4G
Recommended Battery: LiPo 4S 1100mAh-1300mAh (4S Version) / LiPo 6S
850mAh-1100mAh(6S Version)