Gerber OMEGA 2.6 - User Manual

Copyright Notice
COPYRIGHT  2007 Gerber Scientific International. All Rights Reserved.
Portions Copyright © 2001 artofcode LLC. This software is based in part on the work of the Independent JPEG
Group. Portions Copyright © 1998 Soft Horizons. All Rights Reserved.
Ghostscript Included.
This document may not be reproduced by any means, in whole or in part, without written permission of the
copyright owner.
This document is furnished to support OMEGA. In consideration of the furnishing of the information contained in
this document, the party to whom it is given assumes its custody and control and agrees to the following:
1 The information herein contained is given in confidence, and any part thereof shall not be copied or reproduced
without written consent of Gerber Scientific International.
2 This document or the contents herein under no circumstances shall be used in the manufacture or reproduction
of the article shown and the delivery of this document shall not constitute any right or license to do so.
Printed in USA
OMEGA, GERBER MAXX, GA, Gerber ColorID, Gerber P2C, GERBER SOLARA UV, ART Path, Gerber enVision, FasTrack,
ImageRIP, ODYSSEY, GERBER EDGE FX, Sabre, GerberColor, Spectratone, and Support First are trademarks and GRAPHIX
ADVANTAGE, GERBER EDGE, EDGE, Gerber Scientific Products, and GSP are registered trademarks of Gerber Scientific
Products. Adobe Illustrator and PostScript are trademarks of Adobe Systems Incorporated. Artifex, the Artifex logo, Ghostscript,
and the Ghostscript logo are registered trademarks of Artifex Software, Inc Allen Datagraph is a trademark of Allen Datagraph,
Inc. Aristo AG50 and AG130 are registered trademarks of the Aristo Graphic Systeme GMBH & CO KG. ENCAD and NovaCut are
registered trademarks of Eastman Kodak Company. Graphtec and SignJet PRO are trademarks of Graphtec America, Inc. HPGL is a
trademark and HP is a registered trademark of Hewlett-Packard Company. Ioline is a trademark of Ioline Corporation. Mimaki is a
trademark of Mimaki Engineering Co., LTD. Roland PNC is a trademark and Roland is a registered trademark of Roland Digital
Group. Summa is a registered trademark of Summa Inc. Vytek is a trademark of Vinyl Technologies, Inc. Wild is a registered
trademark of Leica. Windows, Microsoft, and Vista are registered trademarks of Microsoft Corporation in the U.S. and other
countries. Zund is a registered trademark of Zund System Technik AG. Intel is a registered trademark of Intel Corporation.
Macintosh is a registered trademark of Apple, Inc. Radio Shack is a registered trademark of Radio Shack Corporation. Sentinel is
a trademark of SafeNet, Inc. Onyx is a registered trademark of Onyx Graphics.
PANTONE® Colors displayed may not match PANTONE-identified standards. Consult current PANTONE Color Publications
for accurate color. PANTONE® and other Pantone, Inc. trademarks are the property of Pantone, Inc. © Pantone, Inc., 2005.
Pantone, Inc. is the copyright owner of color data and/or software which are licensed to Gerber Scientific Products to distribute
for use only in combination with Gerber OMEGA 2.6. PANTONE Color Data and/or Software shall not be copied onto another
disk or into memory unless as part of the execution of Gerber OMEGA 2.6.

Summary

Installing OMEGA Software

Understanding Security Issues

Explains the importance of security keys for OMEGA 2.6 software operation.

Understanding the Sentinel System Driver

Describes the function and installation of the Sentinel System Driver for security keys.

Installing OMEGA 2.6 Software for New Users and GRAPHIX ADVANTAGE Upgrades

Step-by-step guide for new users and upgrades from GRAPHIX ADVANTAGE.

Installing OMEGA 2.6 Software for OMEGA 1.5 x Users

Step-by-step guide for upgrading from OMEGA 1.5x to OMEGA 2.6.

Configuring the Ports After OMEGA 2.6 Installation

Instructions on configuring computer ports for proper OMEGA 2.6 operation.

Adding Output Devices

Installing Vinyl Printers

Detailed steps for installing local, remote, and network vinyl printers.

Installing the GERBER EDGE as a USB Printer

Guide on connecting and installing the GERBER EDGE as a USB device.

Errors and Possible Solutions

Networked Vinyl Printers

Procedures for adding and configuring vinyl printers on a network.

Adding or Deleting an Ink Jet Printer

Adding or Deleting a Plotter

Using the Gerber Device Profile Manager

Installing ICC Profiles using the Gerber Device Profile Manager

Filtering ICC Profiles using the Gerber Device Profile Manager

Removing ICC Profiles using the Gerber Device Profile Manager

Making the Required Update to Sabre Firmware

Essential steps to update Sabre router firmware for OMEGA 2.6 compatibility.

Troubleshooting the Sabre Firmware Update

Guidance on resolving issues during Sabre firmware updates.

Troubleshooting

Questions and Answers

My System Cannot Communicate with the Plotter?

Troubleshooting steps for connectivity issues between the system and plotters.

Technical Support Messages

HPGL Plotter Installation

Verifying Communication Settings

Customizing Plotter Setup

Procedures for configuring OMEGA 2.6 to communicate with non-listed HPGL plotters.

Networking Devices

Connecting and Sharing Output Devices

To Share the Queue Folder

To Map a Network Drive to the gspqueue Folder

Gerber OMEGA 2.6 Specifications

General

Brand	Gerber
Model	OMEGA 2.6
Category	Software
Language	English