Gesipa FireBird - Blind Rivet Nut Setting Tool; Use for Intended Purpose; Safety Information

19
GB
2. Blind rivet nut setting tool
2.1 Use for intended purpose
The blind rivet nut setting tool must only be used for the purpose of setting blind rivet nuts as
described in these operating instructions. Observe the safety information!
2.2 Safety information
Caution!
The following safety rules must be observed to ensure adequate protection against electric
shock, injuries or re hazards:
• The blind rivet nut setting tool is intended solely for the purpose of processing blind rivet nuts.
• Never overload the blind rivet nut setting tool; work within the specied working capacity.
• Never use the blind rivet nut setting tool in a humid or wet environment or close to ammable
liquids or gases. Danger of explosion!
• Ensure that the battery is properly secured in the handle.
• Always remove the battery when the blind rivet nut setting tool is not in use and for maintenance.
• Never use the blind rivet nut setting tool as a hammer.
• When not in use, keep the blind rivet nut setting tool in a dry, closed room and out of the
reach of children.
1. Overview (see Fig. 1 - 5)
Item Description Fig.
A Threaded mandrel 2
B Nosepiece 2
C Lock nut 2
D Setting nut 2
E Lock nut 2
F Hanger 1
G Cap 1
H Screwdriver 1
I Accessory magazine 1
J Safety lamp 1
Item Description Fig.
K Switch 1
L Rechargeable battery 1;5
M Slide 3
N Charge indicator 5
O Battery charger 5
P Set blind rivet nut 4
x
Threaded mandrel length 2
y Setting stroke 2
z Grip range 4