Gesipa PowerBird - Nosepiece Allocation

20
GB
Rivet
Ø (mm)
Rivet material Nosepiece Part No.
Jaw
pusher
Part No. Jaws Part No.
2.4 Al 17/18* 143 4976
5 143 4872 4 143 4104
3.2 CAP
®
Al, CAP
®
Cu 17/18* 143 4976
3 and
3.2
Al, Cu, steel, stainless
steel, Stinox, Al/Al, PG
Al, PG steel, PG stain-
less steel
17/24* 143 4955
4
Al, Cu, CAP
®
Al, CAP
®
Cu
17/24* 143 4955
4 Steel, Al/Al, PG Al 17/27* 143 4973
4
Stainless steel, Stinox,
PG steel, PG stainless
steel
17/29* 143 4974
4.8 and
5
Alu, CAP
®
Al, CAP
®
Cu,
PG-Al
17/29* 143 4974
4.8 and
5
Steel, Al/Al 17/32 143 4975
4.8 and
5
PG steel, PG stainless
steel, G-Bulb
17/36 143 4977
6 Al 17/36 143 4977
6 Steel 17/40 143 4999
5 143 4861 4 143 4104
6.4 Al 17/40 143 4999
6.4 Steel, PG-steel, Al/Al 17/45 143 4860
8 Al 17/45 143 4860
1.4 Nosepiece allocation
BULB-TITE
®
Ø (mm)
Rivet material Nosepiece Part No.
Jaw
pusher
Part No. Jaws Part No.
4 Al/Al 17/26 BT* 143 4985
5 143 4861
4 143 4173
5.2 Al/Al 17/32 BT* 143 4986
6.3 Al/Al, steel/steel 17/42 BT* 143 4988
5 143 4872
7.7 Al/Al 17/48 BT* 143 4989
BT = BULB-TITE
®
* available as special accessory. Elongated nosepieces and other special nosepieces are
available on request.