Getinge 600 User Manual

<Doc_USR><Doc_502796900><Rel_E><Lang_MULTI>
Page 10 of 128
OPERATING INSTRUCTIONS
1. Place the goods to be cleaned in the holder.
2. Choose a program from the table below.
Economy program: Presst.
Normal program Press u.
(This button allso activates the pouch eater program on Getinge 608)
Intensive program: Press r, if the items are heavily soiled.
To add detergent agent press s.
By means of a preselection, detergent can be added automatically during each
program.
If detergent dispensing is automatic, the detergent can be cancelled by pressing s.
3. Press the foot pedal to start the program. The program indicated by the lamp
will start.
4. The yellow lamp at M ashes for six seconds. During this period the program can
be cancelled.
5. The green lamp N comes on when the program is ready and the door is
opened slightly .
The goods may be hot at the end of the program. If the temperature of the
goods is above 60 °C, the display shows U7.
6. To open the door completely, press on the pedal.
Program Economy program Normal program Intensive program
Degree of soiling Slightly soiled Normally soiled Heavily soiled
Press the program
button
t u
INTENS
Program sequence Cleaning
Disinfection
Cooling
End of program:
Cleaning
Disinfection
Cooling
End of program:
Cleaning
Disinfection
Cooling
End of program:
Program time 3-6 min 5-7 min 6-8 min
Energy 0.18 kWh 0.18 kWh 0.18 kWh
Water excl. cooling
Water incl. cooling
18 litres
21 litres
29 litres
32 litres
36 litres
39 litres
The three standard programs in the Getinge 600 series are described above. Other pro-
grams may be accessible from the t ,u and r buttons, see the Technical Manual.
If the machine has not been used for 72 hours the steam generator and
circulation pump must be emptied. This operation must be performed by
authorised personnel. For further instructions see Technical manual.

Getinge 600 Specifications

General

Brand	Getinge
Model	600
Category	Laboratory Equipment
Language	English