Getinge 600 User Manual

<Doc_USR><Doc_502796900><Rel_E><Lang_MULTI>
Page 9 of 128
ENGLISH
&=q
NOTE:
Only call service personnel when fault code F occurs. In the event of fault code U or H the
fault can be rectified by the user.
Display
Economy programRed: Disinfection
not achieved, or
other fault code F
Green: Process
complete
Yellow:
Process
running
Intensive program
Pouch eater program*
Cleaning agent
Peripheral flushing
Normal program
Control panel
Button/lamp Operation
L
When the yellow lamp comes on: The machine is running a program.
The temperature and cleaning phase can be seen on the display.
M
When the green lamp comes on: The program is complete. The green lamp goes
out when the door is opened and the maximum process temperature is shown on
the display .
O
When the red lamp comes on: The machine has reached the disinfection temperature or
another fault has occurred (Fault code F).
t
Button to start the economy program for urine bottles.
u
Button to start the normal program for normally soiled items.
INTENS Button to start the intensive program for heavily soiled items.
* Button for Pouch eater program Getinge 608
i +u
The button combination for program selection with cleaning agent for general circula-
tory items, e.g. hand bowls.
i + INTENS
The button combination for program selection with cleaning agent for heavily soiled
goods, e.g. wound dressing instruments.
h
Button to start peripheral flushing. Peripheral flushing cannot be started with the pedal.
NOTE: No disinfection!
Pedal starts the selected program

Getinge 600 Specifications

General

Brand	Getinge
Model	600
Category	Laboratory Equipment
Language	English