Dosing pumps for detergent
The washer-disinfector comes as standard with two dosing pumps for detergent for process chemicals,
but a third and fourth can also be installed. This allows the chemical disinfection of e.g. heat-sensitive
objects. All dosing pumps for detergents have flow-regulation.
Water-saving tanks
One or two water-saving tanks can be installed in the service area.
Docking for wash cart
A docking mechanism in the floor to dock wash carts equipped with spray arms.
Booster tank
A docking mechanism in the floor to dock wash carts equipped with spray arms.
Automatic spray system for valve rack
The spray system to be used with special carts equipped with this type of spray system.
Waste cooling
Cooling system to adjust the temperature of the waste water that comes from the machine.
Neutralization system for waste water
Neutralization system for adjusting the pH value for the waste water that comes from the machine.
Comes in two versions, time control or pH monitoring.
Conductivity control, final rinse
Conductivity control for the final rinse.
Conductivity control, dosage
Conductivity control for dosage of detergent
Wash cart incline
The Chamber floor can be tilted in the washing phase so that the water on the items can drip off and the
items can dry faster.
Printer, option 1
Thermal printer that provides a printout of activities in the washer-disinfector during the process at a
preset time.
Printer, option 2
Laser printer
Flow sensor with kalrez seal
Flow sensor with kalrez seal for highly concentrated detergent.
Front panels for service area
Cover plates to conceal the service area. The cover plates have a door for easy access to the space.
Page 9 of 92
<Doc_INS><Doc_6001341302><Rel.A><Lang_en>
To Next Page
Loading...
Need help?
General
