Getinge Decomat 4656 User Manual

5
Decomat 4656Operating instructions
9803
Programming device
The machine is fitted with an electronic programmable device which can contain
a maximum of 60 different programs. Six of these programs can be chosen using
the program selection buttons.
A number of standard programs are included in the programming device on
delivery (see section, Standard programs). These programs can be modified to
suit individual customer requirements. Furthermore, completely new individual
programs can be programmed directly into the machine from the machine
control panel. If desired, the whole or parts of a standard program can be used as
the basis for programming.
Programming may only be carried out by authorized personnel.
Door function
Decomat 4656 can be provided with one or two doors. Doors are fitted with an
electrical interlocking system to prevent opening during the program sequence.
V164
V192
Clean
side
Soiled
side
Two doors are required where it is necessary to separate the soiled and cleaned
side of the machine. Operation will then be as follows:
It is never possible to open both doors at the same time. The door on the soiled
side remains unlocked prior to starting and the door on the cleaned side will be
locked. Both doors are locked on pressing the starting button. On completion of
the program sequence, the door on the clean side will unlock but the other door
will remain locked. The cleaned dishware can then be removed whereafter the
door should be closed again, causing it to lock and the door on the soiled side to
unlock in preparation for the next sequence.

Getinge Decomat 4656 Specifications

General

Brand	Getinge
Model	Decomat 4656
Category	Laboratory Equipment
Language	English