What to do if the Getinge Laboratory Equipment machine is overfilling?
If the Getinge Laboratory Equipment machine is overfilling, you should: 1. Check the hoses for leaks. 2. Check the drainage system to ensure drainage water doesn't overflow the chamber. 3. Check the function of the level sensor. 4. Check that the water level in the condenser does not increase and form a water lock.
What to do if there is overfilling in the condenser of Getinge GE15 Laboratory Equipment?
If there is overfilling in the condenser of the Getinge Laboratory Equipment, you should: 1. Check the function of the condenser’s drainage pump. 2. Check that water can be pumped out of the drainage system. 3. Check the function of the level sensor.
What to do if there is an unlocked door on Getinge GE15?
If the door on the Getinge Laboratory Equipment remains unlocked, you should: 1. Check that nothing is trapped in the door. 2. Check that the door locking switch (-S01) is activated on door locking.
What should I do if the Getinge Laboratory Equipment chamber empties slowly?
If the chamber of the Getinge Laboratory Equipment empties slowly: 1. Check the function of the drainage pump. 2. Check the function of the level sensor. 3. Check that water can be pumped out of the drainage system.
What should I do if the Getinge Laboratory Equipment chamber fills slowly?
If the chamber of the Getinge Laboratory Equipment fills slowly: 1. Check that the cover inside the chamber opens for incoming water. 2. Check the function of the level sensors. 3. Check the function of the filling pump for the water softener.
What to do for water leakage in the Getinge GE15 Laboratory Equipment dryer?
If you observe water leakage in the dryer of the Getinge Laboratory Equipment, you should: 1. Check the check valves in the drying channels. 2. Check the function of the sensor.
What to do if Getinge GE15 Laboratory Equipment shows an incorrect temperature indicator?
If the Getinge Laboratory Equipment shows an incorrect temperature indicator, check the temperature sensor for an open-circuit or short-circuit.
What to do if Getinge GE15 shows a faulty independent temperature sensor?
If the Getinge Laboratory Equipment indicates a faulty independent temperature sensor, check the temperature sensor for an open-circuit or short-circuit.
What does it mean if there is high temperature in wash chamber of Getinge Laboratory Equipment?
If there is a high temperature in the wash chamber of the Getinge Laboratory Equipment, it means the temperature in the chamber is more than 5°C above the highest reference point.
What to do if there is low pump pressure in Getinge GE15?
If there is low pump pressure in the Getinge Laboratory Equipment, you should: 1. Check that the shut-off valves for the water are open and that water is reaching the machine. 2. Check the function of the sensor.
Details of the machine's control panel, including indicators, buttons, and window displays.
Overview of the machine's control system and configuration options.
Details on adjustable (A) and programmable (P) machine parameters.
Identification of errors, codes, and step-by-step actions to resolve issues.
Recommended maintenance activities performed at regular intervals.
Procedures for loading system and application programs into flash memory.
General| Brand | Getinge |
|---|---|
| Model | GE15 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
