6 FUNCTION CHECK
WARNING!
Only to be carried out by authorized staff.
WARNING!
The machine is connected to the electricity
supply and some components are live.
6.1 Instructions, cable, switch
• Check that the goods placing sign is posted on the wall
behind the washer-disinfector.
• Check that the isolator switch on the wall is working and that
the connecting cable is undamaged and free from defects.
6.2 Filters and valves
• Check that level switches and manual shutoff valves are
working properly.
• Check the filter in the supply line. Clean if necessary.
• Check all pipe couplings. Tighten and seal if necessary.
6.3 Operator display
• The machine is operated with the buttons on the operator
panel.
• Check that the control buttons are working. If the buttons are
working, a beep will be heard.
• While a program is running check that the yellow lamp at is
lit.
The green lamp at
lights up when the program is complete.
6.4 Insert for items
• Check that the inserts for the machine connect properly to the
water outlets.
• Check that the spray arms rotate and are not clogged.
• Check that the items to be cleaned are retained in the insert.
6.5
Door
Check the door safety function. Check that the door seal closes
tight and is undamaged and that there is no leakage while a
program is running. Clean or replace the seal if necessary.
6 FUNCTION CHECK
TECHNICAL MANUAL GETINGE WD15 CLARO 75 (128)
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>
To Next Page
Loading...
Need help?
General
