2.3.3 Password
There are four passwords with different levels of authorization in
the system program. The operator password has the lowest
authority; the programming password has full authority.
The password levels are as follows:
• Operator – code 558387.
• Supervisor – contact service for code.
• Service - contact service for code.
• Programming – contact service for code.
Passwords are entered through an entry window that automatically
appears once you have selected a menu that requires a password.
Enter the password with the help of the buttons . Choose
and press to confirm the password you have entered.
Note: In the menu tree, where a password must be entered,
there is a letter code (between PW: A-K) which indicates
which function the respective password level gives
authorization for.
If a user has logged in through the main menu (Log in), they are
automatically given access to all menus and functions as per the
access rights of that password. If a menu outside the area of
authorization is selected, an input window appears for a new log in
with a password that has more authorization.
If an incorrect password is entered, an info text will be shown on
the display. Press to get back to the input window.
Note: The password cannot be changed.
2.3.3.1 Operator
Authorization code Authorization
Default settings Panel setup, Localization, Machine
name, Date and time, Screen setup
Basic settings process Edit A parameters.
Basic printout. Emergency printout, Test page.
Password 1 Acknowledge the alarm.
2 PRESENTATION
TECHNICAL MANUAL GETINGE WD15 CLARO 19 (128)
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>
To Next Page
Loading...
Need help?
General
