7 REPAIRS AND ADJUSTMENT
WARNING!
Only to be carried out by authorized staff.
WARNING!
Before starting work, make sure that the machine
is disconnected from the electric power supply.
WARNING!
When repairing the underside of the machine, the
machine must be rotated to the left (see
illustration), otherwise there is a risk of damage
to the pressure switch.
WARNING!
Do not lift the machine by the door handle.
WARNING!
Allow the machine to cool down before starting
work.
WARNING!
Make sure that the protective cover on the panel
card stays in place properly before the door on
the front is put back. If it is hanging loosely, there
is a risk that it will get stuck in the cooling fan on
60 Hz machines.
7 REPAIRS AND ADJUSTMENT
TECHNICAL MANUAL GETINGE WD15 CLARO 77 (128)
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>
To Next Page
Loading...
Need help?
General
