7.11 Printer Lexmark C524/534 (Option)
This is how to connect the printer to the machine:
1. Connect the printer with the accompanying printer cable to
the “Printer/Netcom” port on the back of the machine.
2. Normally the only setting will be “Printer Selection: Type”
which should be “HP COLOR” while the others should be
correct from the factory. But if it does not work, check that
they are set according to the illustrations below.
7 REPAIRS AND ADJUSTMENT
TECHNICAL MANUAL GETINGE WD15 CLARO 95 (128)
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>
To Next Page
Loading...
