Getinge GE15 - Replacing Fuses; Assembly of Front Panel

7.3.5 Replacing fuses
• Remove the HEPA filter according to instructions.
• Once the HEPA filter is removed there are fuses in a fuse box
as per the illustration.
000447
1
Figure 17. Fuse-base
1. Fuse-base
7.3.6
Assembly of front panel
WARNING!
Make sure that the plastic that protects against
splatter is properly installed before the front
panel is put back in place. Make sure that the
plastic does not cover the HEPA filter.
000446
Figure 18. Splash shield
7 REPAIRS AND ADJUSTMENT
84 (128) TECHNICAL MANUAL GETINGE WD15 CLARO
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>