3.2.1 Login/Logout
To log in, select Log in and press . An input window appears to
enter a password. For more information about authorizations and
passwords, see 2.3.3 Password. Users who are logged in can
then navigate around the machine’s software with access to the
windows and parameters that are allowed by the authorization of
the password that is used during the login. If a menu outside the
area of authorization is selected, an input window appears for a
new log in with a password that has more authorization.
Because a user is already logged in, Log out is displayed instead.
To log out, the current user selects Log out and presses .
Typing in an incorrect password brings up an information popup.
Press
to get back to the input window.
If an incorrect password is entered on login when starting the
program, the panel returns to the previous menu after one minute.
3.2.2 About
A list of machine specific data is displayed. The following
information is displayed:
• Machine Name
• Application version
• Panel version
• PACS version
• PROM date
• Serial number
• Total process count
3.2.3
System menu
The system menu consists of four submenus:
• Settings
• Edit cycle
• Service
• User management
The submenus are described below under each respective
heading.
3 MENU TREE
24 (128) TECHNICAL MANUAL GETINGE WD15 CLARO
<Doc_TEC><Doc_6001396902><Rev.I><Lang_en>
To Next Page
Loading...
Need help?
General
