Getinge Decomat 4656 User Manual

9
Decomat 4656Operating instructions
9803
Error code: 05
Error codes (F-codes)
The error codes indicate a serious malfunction in the washing sequence. Such
errors must be attended to by authorized personnel.
The following error codes can appear:
Code Fault Comments
1 Filling with water too slow Water level sensor not activated within 10
minutes from commencement of filling.
2 Heating of water too slow Water not heated 10°C from initial
temperature within 8 minutes from
commencement of heating.
3 Draining not working. Water level sensor still activated at end of
programmed draining period.
4 Drying air temperature too low. Air temperature below 62°C after 15
minutes drying.
5 Faulty temperature sensor. Displayed temperature below 0°C or
above 110 °C.
7 Motor circuit breaker triggered. Motor circuit breaker for the circulation
pump is triggered.
8 Malfunctioning door, soiled side. Sensor ”Door closed” in the lock is not
activated.
9 Malfunctioning door, cleaned side. Sensor ”Door closed” in the lock is not
activated.
12 Water leakage in drying section. Level sensor in drying section activated
while circulation pump is running.
Acknowledgement of error code
After rectifying an error, press the Gbutton for at least 5 seconds to reset the
code.

Getinge Decomat 4656 Specifications

General

Brand	Getinge
Model	Decomat 4656
Category	Laboratory Equipment
Language	English