What to do if the Getinge Lucea 50 Medical Equipment remote control does not operate the light?
If the remote control isn't operating your Getinge Medical Equipment light, first try re-registering the remote control. If that doesn't work, replace the batteries, as the battery level may be low.
Why the sterilisable handle of my Getinge Medical Equipment does not click into place correctly?
If the sterilisable handle of your Getinge Medical Equipment doesn't click into place correctly, check the handle's operation, especially the locking mechanism, for an audible click. This issue may arise if sterilisation temperature or time parameters were exceeded. If the problem persists, or if the handle is twisted, bent or its maximum service life has expired, replace the handle.
What does it mean if LED 4 flashes on Getinge Lucea 50 Medical Equipment?
If LED 4 on your Getinge Medical Equipment is flashing, it means the batteries are discharged. Recharge the batteries to resolve this.
What to do if LED 3 is lit red on Getinge Medical Equipment?
If LED 3 is lit red on your Getinge Medical Equipment, it indicates that the batteries are almost totally discharged. You should recharge the batteries urgently.
What to do if LED 1 is lit red on Getinge Lucea 50 Medical Equipment?
If LED 1 is lit red on your Getinge Medical Equipment, it indicates that the batteries are almost totally discharged. You should recharge the batteries urgently.
General| Brand | Getinge |
|---|---|
| Model | Lucea 50 |
| Category | Medical Equipment |
| Language | English |
Welcome message and overview of Getinge's medical technology and surgical lights.
Details on document usage, abbreviations, symbols, and hazard level definitions.
List of related manuals, liability, expected service lifetime, and warranty information.
Explanation of product and packaging symbols and the device identification label.
Description of product components and applicable safety and regulatory standards.
Information on intended use, indications, clinical benefits, and environmental impact reduction.
Specifies ambient temperature, humidity, and pressure requirements for transport, storage, and use.
Covers safe product use, electrical, optical, and infection-related safety precautions.
Procedure for performing essential daily checks on the lightheads and system stability.
Instructions for turning the light on/off and adjusting illumination levels via keypad or remote.
Guidance on operating the camera zoom and image position for LUCEA 100 models.
Steps for attaching handles, maneuvering the lighthead, and pre-positioning for procedures.
Procedures for registering the remote control and replacing its batteries.
Guidance on moving, battery operation, and pre-positioning for the mobile light configuration.
Information regarding error messages and alarm indicators for the product.
Troubleshooting steps for common electronic and optical problems with the lightheads.
Solutions for mechanical anomalies such as handle locking and lighthead drift.
Guidance for resolving problems related to the mobile light's mains supply and battery backup.
Procedures and precautions for cleaning and disinfecting the main surgical light system.
Instructions for preparing, cleaning, and sterilising the STG HLX sterilisable handles.
Overview of recommended annual, 3-year, and 6-year maintenance tasks.
Information on contacting Getinge representatives for technical support and training.
Detailed specifications for illumination, color rendering, and residual light.
Specifications for voltage, power consumption, and battery performance.
Physical specifications including weight and arm reach for mobile light models.
Details on device classification, protection ratings, and EMC declaration.
Guidelines for the environmentally friendly disposal of packaging, product, and components.
To Next Page
