Getinge WD15 CLARO Installation Manual

2.3 Installing freestanding
WARNING!
The wall bracket has to be mounted to prevent
the machine from tipping.
Put the machine against the wall and adjust the feet so that the
machine is standing level. Then adjust the mounting plate on the
upper edge of the machine against the wall. Secure the machine
with screws.
000464
1
Figure 3. Placement of screw hole(s)
1. Screw hole(s)
2 INSTALLATION
INSTALLATION MANUAL GETINGE WD15 CLARO 13 (48)
<Doc_INS><Doc_6001396702><Rev.I><Lang_en>

Getinge WD15 CLARO Specifications

General

Brand	Getinge
Model	WD15 CLARO
Category	Laboratory Equipment
Language	English