3.2 Quick Setup
Quick Setup will help you setup the Broadband Router quickly. There have six types of WAN Connections: Dynamic IP
Address, Static IP, PPPoE, PPTP, L2TP, and BigPond.
When configure the Quick Setup wizard, you can setup Host Settings, such as Host name, Time Zone, and Daylight
Saving as below. Click “Next” to continue.
After specify the WAN connection type required by your ISP, please follow the next steps to configure DHCP and DNS
settings to complete the wizard.
Dynamic IP address: Obtain an IP address automatically from your service provider.
Static IP: Use Static IP address to access Network, your ISP will provide a static IP address.
PPPOE: PPPoE is a common connection type used for xDSL.
PPTP: PPP Tunneling Protocol can support multi-protocol Virtual Private Network (VPN)
L2TP: Layer 2 Tunneling Protocol can support multi-protocol Virtual Private Network (VPN)
BigPond: BigPond is an Australian internet service provider and is a subsidiary of Telstra.
To Next Page
Loading...
Need help?
General