3.3.2 System Settings
The System Settings window configures broadband router basic settings, such as router’s Host Name, Set Time Zone,
Daylight Saving and Operation Mode.
NTP Server (IP or Domain Name): Enter a Domain Name if it was provided by the ISP
Time Zone: Select the time zone of the country you are currently in. The router will set its time based on your selection.
Daylight Saving: The router can also take Daylight savings into account. If you wish to use this function, you must
check/tick the enable box to enable your daylight saving configuration.
Host Name: Enter a hostname if it was provided by the ISP (Default: router).
NAPT: You can select to enable NAPT function.