3
SafetyGC 363 R / SF
Symbols and illustrations
Warning notices
Warning notices are used in these instructions to warn you of property
damage and personal injury.
X
Always read and observe these warning notices.
X
Observe all the measures that are marked with the warning symbol and
warning word .
Abbreviations
FR Escape and rescue routes
IR Infrared
AIR Active infrared control
RAD Radar
LCD Liquid Crystal Display
HSK Main closing edge
NSK Secondary closing edge
Product liability
In accordance with the liability of the manufacturer for his products as
dened in the German "Product Liability Act", the information contained
in this brochure (product information and proper use, misuse, product
performance, product maintenance, obligations to provide information and
instructions) is to be observed. Failure to comply releases the manufacturer
from his statutory liability.
1 Safety
1.1 Intended use
The combined sensor GC 363 may only be used to actuate and safeguard
automatic sliding doors and circular sliding doors with GEZE drives. The
minimum object size corresponds to the reference object CA according to
DIN 18650 or 16005 both upright and lying down. The sensor can be used to
secure automatic sliding doors against impact and trapping of the human
body.
11 Error messages and troubleshooting ........................................... 28
12 Technical data ....................................................................................... 31
13 Accessories / Spare parts .................................................................. 33
To Next Page
Loading...
Need help?
General
