4
3.
Installation Safeguards
• Shipping damage should be brought to the immediate attention of the
delivering carrier
• Avoid locating the laminator near sources of heat or cold. Avoid locating
the laminator in the direct path of forced, heated or cooled air
• The receptacle must be located near the equipment and easily accessible.
• Connect the attachment plug provided with the laminator to a
suitably grounded outlet only. This machine must have reliable earth wire
to ensure the safety of the machine during operations
• Contact an electrician should the attachment plug provided with the
laminator not match the receptacles at your location
• Ensure that the voltages of the power supply you are using match the rated
working voltages before operations. Do not use incorrect power supply
• Do not use damaged wires or sockets. If abnormal conditions occur, switch
off the power supply first.
• Only a licensed electrician should install wiring and outlet for the
laminator
• Do not defeat or remove electrical and mechanical safety equipment such as
interlocks, shields and guards
To Next Page
