Programming Guide Mitras LX7
EN 2016-11-21 13
Then the lighting channels are operated with 50% of the normally set brightness on the
01.12.2016 (and also before), on the second day with 75%, and on the last day with 100%
(and also thereafter).
Starting and ending percentages can be adjusted as needed; thus an increase as well as a
lowering over a certain period of time is possible.
The acclimation function currently cannot be set on the device itself. Please
use GHL Control Center for this purpose.
3 Extras
Special functions and settings are summarized here. The following submenus are viewable:
3.1 Info & Support
After selecting this menu item, information about the firmware version, model and our
homepage is displayed one after the other (automatically after a certain time or after
pushing a button).
3.2 Language
The language in which Mitras LX7 displays texts can be set here.
3.3 Display
The brightness of the display and control panel lighting can be adjusted here.
Display bright (0% - 100%) determines the display brightness during the day
Display dark (0% - 100%) determines the brightness of the display at night
Display dark Start and End determine the time in which the display is to be dimmed.
If Mitras LX7 is set to German, this menu appears under Extras-> Sprache.
Select this option to change the language.
To Next Page
Loading...
Need help?
General
