Programming Guide Mitras LX7
EN 2016-11-21 6
1 Clock
Use the clock feature to make changes to all time-related settings. Mitras LX7 uses the
astronomical hour count which divides the day into 24 h.
1.1 Time & Date
This option allows you to optimize the speed of the internal clock by entering a correction per
day ranging from -59s to 59s (Optional).
At 0s (default setting), the clock runs without correction. At any other correction, the adjusted
second number is added (or subtracted) once per day.
After changing these settings, you can then set the date and time manually.
If you have several Mitras® LX7 in-use, you can conveniently adjust your
settings from one luminaire. Once settings are saved, the settings are
automatically transmitted to the other luminaires.
Assign one luminaire as a master (Menu: System-> Wireless) and the others
as slaves. Each luminaire should also be assigned a different address (No.1-
31).
The settings of the master are then transmitted via radio to the other
luminaires.
1.2 Location
The coordinates (Longitude and Latitude) of your location can be entered here. This
information will be used for further simulations in the future.
From the factory, this is 49.4 ° N and 7.8 ° E - the coordinates of Kaiserslautern in Germany -
the production location of your Mitras LX7.
2 Illumination
This menu contains all lighting-related settings and functions.
Master and Slave modes are ideal for running simulations across all
luminaires. These simulations can be performed across one or more
To Next Page
Loading...
Need help?
General
