GHL ProfiLux Touch - 1 General; Characteristics; Included in Delivery; Preconditions

User manual Touch
As of 01/12/2016 Page 3/11
1 General
1.1 Characteristics
We thank you for your trust in our ProfiLux - products!
Overview of the characteristics:
 4,3“ Touch color display
 Connection via ProfiLux Aquatic Bus (PAB)
 Shows current values and states clearly arranged
 Start of several special functions possible: maintenance, feeding pause, water change and thunderstorm
 Storing and display of up to 4 million measured values, measuring interval can be set (display of one, seven,
30 or 90 days)
 Design can be adapted: several backgrounds are available and colors for font and diagram can be set.
 Remote control of the connected ProfiLux is possible – basic settings can be made through ProfiLux Touch
 Acoustic alarm (can be switched off)
1.2 Included in delivery
Before you start you should check if the delivery is complete. The following articles belong to the delivery (PAB-cables
are not included in delivery and have to be ordered separately):
 ProfiLux Touch Display
 ProfiLux Touch Interface
 power supply
 connection cable display to interface
 wall mounting set
1.3 Preconditions
 To operate a ProfiLux Touch you need a ProfiLux with PAB (ProfiLux Aquatic Bus). The operation without PAB
is not possible.
 ProfiLux Firmware 5.08 or higher
 ProfiLuxControl 5.0.8.0 or higher or GHL Control Center (all versions)
1.4 Important operation hints
To guarantee a safe and riskless operation, the following instructions have to be followed absolutely! If they are
ignored, the warranty expires resp. the manufacturer rejects any responsibility resp. liability for damages!
 Power-supplied devices and water can become a dangerous combination. Therefore it is absolutely necessary
to supply all power-supplied devices which are operated in the aquarium or next to it with supply voltage via
a fault current protection switch!
 ProfiLux Touch is not waterproof. This means that all parts have to be protected from humidity (also
splashing water)! Please keep this in mind when you choose the place of installation.
 You may only connect the provided cables with the corresponding connections. If you connect other
components, then the warranty expires!