GHL ProfiLux Touch - Selection Menu

User manual Touch
As of 01/12/2016 Page 6/11
Bottom heater is active.
Main heating is active.
Cooling is active.
In the lower status bar you can see the following information:
Symbol
Meaning
A feeding pause is active.
A maintenance is active.
A water change is active.
A reminder is present.
There is an alarm (if ProfiLux gives out an alarm or if the PAB-connection is
interrupted).
At the moment a cloud is simulated.
The thunderstorm simulation is active / flashes are created.
Display of the current moon phase.
The communication via PAB is ok.
In case of inactivity, the corresponding symbols are grayed out (exception moon symbol – here there is no inactivity).
2.2 Selection menu
You get into the selection menu by pressing in the main menu onto any position on the Touch.