1. Pull the lever towards the handlebars
to actuate the brake..
8.4 Quick-release axles
The hubs of your wheels are mounted with quick-release axles in the dropouts
of the fork or frame.The clamping of your saddle post is equipped with a
quick-release axle. These clamping systems permit quick removal and
installation of these components without the use of tools.
WARNING Danger from falls and accidents
If the wheels and seat post are not correctly mounted,
these parts can become loose and as a result lead to dangerous riding
situations, falls and accidents.
Comply with the following description.
Practise the operation of the quick-release axle several times and regularly.
If after installation you are not sure whether your wheels and/or the saddle
post have been correctly mounted, do not use your EPAC and consult your
specialist bicycle dealer.
8.4.1 Opening, closing the quick-release axles
1 Axle 2 Nut
3 Lever 4 Spring
To Next Page
Loading...