1.4.4 Representation
In this operating manual we use the following representation rules:
Safety instructions are shown with a symbol and signal word in bold -
see section 1.4.1, Symbols and signal words.
Instruction texts are numbered.
Information and cross-references are in italics.
Representations in illustrations are not specific to any particular model.
They apply to all EPAC models in this operating manual.
Definitions of positions
In this manual we use the following names for the position
of objects in space (position information):
The words left, right, front and rear always refer to the position
in the direction of travel.
To Next Page
Loading...