Remove the packing box. Gently pull the bottom part
of the front panel towards
you. Then lift the hooks at
the top of the panel out of
the appliance.
Remove all the filters from the
appliance and remove all pack-
aging materials from the filters.
Put Deformaldehyde Cold
Catalyst filter back into th-
e appliance. Make sure the
side with the tag is facing
outside.
Put Germagic HEPA filter
back into the appliance. Make
sure the side with the tag is
facing outside.
Put the Pre-filter back into
the appliance.
Put the plug in the wall socket
(220V). All lights go on and
you hear a beep. Then the
lights go out again with the
power signal on.
To reattach the front panel,
put the top panel onto the
V-shape track first, and then
put the panel to attach to the
magnetic lock at the bottom.
Press the on/off button to
switch on the appliance.
4ENGLISH
Before First Use
HA161112002A
148*210MM K
To Next Page
Loading...