Timer setting
Pre-set timer will stop the machine from running in 1,2,4,8 hours
periods.
Filter replacement
Indicator flashes,filter replacement sound beeps for 5 times.
Filter replacement
7
ENGLISH
Operating Instructions
Sleep mode
Press the SLEEP button to let the appliance works quietly and
runs in minimized energy consumption. All panel indicator lights
will turn off with only the sleep button lights on.
Press the auto button to end the sleep mode and turn to auto mode.
Negative Ions
Press the negative ions button (Ions) to activate and stop
negative ions function.
Filter placement in sequence
3. Deformaldehyde Cold Cat-
alyst Filter
2. Germagic HEPA filter
1. Pre-filter
Gently pull bottom
end of front panel
out.
2.Remove the filters
need to be changed.
3.Remove packaging;
install the filters
according to sequence.
4.Long press SLEEP butt-
on for 5 seconds to reset
and turn off the filter repl-
acement indicator.
5.To reattach the front panel,
put the top panel onto the
V-shape track first, and then
put the panel to attach to the
magnetic lock at the bottom.
1.
HA161112002A
148*210MM K
To Next Page
Loading...