Model
Product Specification
Appliable Floor Area
Gas Senor
Removal of Formaldehyde
Remote Control
Timer Mode ( Hrs )
39-50
420-538
95%
1 / 2 / 4 / 8
Air Quality Indicator
Red ( poor)/ Purple ( fair )/ Blue ( good )
Noise ( dBA) 36-51-58
Speed Setting 3 Fan Speeds (Lo/ Mid /Hi )
Sleep Mode
Cord Length
Safety Standard
Frequency
Volt
Power Consumption (W)
Dimension (H x W x D) mm
Weight (Kg)
1.8M
CE
50HZ
220V
21/31/39
555 x 345 x 200
7.5Kg ; Net 6.2Kg
Replacement Filters
9
ENGLISH
Specifications/ Maintenance
Maintenance
1.Always unplug the appliance before you clean it.
2.Never immerse the appliance in water or any other liquid.
3.Never use aggressive or flammable cleaning agents such as bleach or alcohol to clean any
part of the appliance.
4.Only the pre-filter is washable. All other filters are NOT washable.
5.Ensure all replacement parts are dry before use.
Body of the appliance
Regularly clean the inside and outside of the body to prevent dust from collecting on the inside
and outside.
1.Wipe away dust with a soft dry cloth from the body of the appliance.
2.Clean the air inlet and the air outlet with a soft dry cloth.
3.TVOC sensor locates at the right side of the appliance. Please clean it every 6 months by
opening the door and swiping the TVOC sensor with a cotton stick. Close door upon completion.
HA161112002A
148*210MM K
(1)
(2)
PAC2302 Germagic HEPA Filter
P/N : K73-PAC2302-HEPA
Deformaldehyde Cold Catalyst Filter
P/N : K73-PAC2302-GAC
1. Max. applicable floor area is based on air change 1.5x/per hour
2. Formaldehyde removal rate report : Guangzhou Testing Center of Industrial Microbiology (Dec 2016), In 4 hours.
PAC2302
To Next Page
Loading...