Appendix
33
3.4 Security
The Security menu allows you to safeguard and protect the system from unauthorized use by
setting up access passwords.
There are two types of passwords that you can set:
Set Supervisor Password
Supervisor Hint String
Entering this password will allow the user to access and change all settings in the Setup
Utility. Press Enter to configure the supervisor password;
Setting the Hint string help user pick up the password from your bad memory.
Set User Password
User Hint String
Entering this password will restrict a user’s access to the setup menus. To enable or disable
this field, a Supervisor password must first be set. A user can only access and modify the
System Time, System Date, and set User Password fields. Press Enter to configure the user
password;
Setting the Hint string help user pick up the password from your bad memory.
Trusted Platform Module (TPM)
This option specifies TPM; If you have installed an extended TPM module, you can find the
TPM setting options here.
To Next Page
Loading...
