Giant Crest 34 - Page 19

19
6
確認阻尼棒的功能。
如果阻尼棒沒有 Lockout 的功能，請以此方式排除：
氣壓室洩氣，Lockout 端跟 rebound 端需都維持在全開閥位置，全行程作動 3~5 次
Check damper function.
If there is no lockout function: Release air from the air spring chamber. Open the low speed
compression and open the rebound damper. Slowly compress cartridge to full travel and then
let cartridge restore to original position 3 to 5 times.