& Audio Controller
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& PCH LAN Controller (LAN1)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& Wake on LAN Enable
Enables or disables the wake on LAN function. (Default: Enabled)
& High Precision Timer
Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)
& IOAPIC 24-119 Entries
Enables or disables this function. (Default: Enabled)
2-7 Power
& Platform Power Management
Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
& PEG ASPM
Platform Power Management is set to Enabled. (Default: Enabled)
& PCH ASPM
Platform Power Management is set to Enabled. (Default: Enabled)
& DMI ASPM
Platform Power Management is set to Enabled. (Default: Enabled)
- 34 -
To Next Page
Loading...
Need help?
General
